Home
Home | Dental Equipment | About | Solutions | Service | News | Contact Us
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English  |
SCS
Electric Dental Lab Product Model Trimmer
Features:
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Specifications:
Power Voltage: 220V/110V 50/60HZ 10/20A
Power: 750W
Speed: 2800rpm
CTN: 47X38X39CM
Gross Weight: 20.5Kg
This machine is easy to operate, with intuitive controls that allow for precise adjustments to achieve the desired trim. The Electric Model Trimmer Machine also features a safety shield to protect users from debris and ensure a safe working environment.
With its sleek and modern design, the Dental Lab Equipment Electric Model Trimmer Machine is a professional and reliable tool that will enhance the workflow and productivity of any dental laboratory. Invest in this top-of-the-line machine to elevate the quality of your dental model trimming process.
Electric Dental Lab Product Model Trimmer
Features:
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Specifications:
Power Voltage: 220V/110V 50/60HZ 10/20A
Power: 750W
Speed: 2800rpm
CTN: 47X38X39CM
Gross Weight: 20.5Kg
This machine is easy to operate, with intuitive controls that allow for precise adjustments to achieve the desired trim. The Electric Model Trimmer Machine also features a safety shield to protect users from debris and ensure a safe working environment.
With its sleek and modern design, the Dental Lab Equipment Electric Model Trimmer Machine is a professional and reliable tool that will enhance the workflow and productivity of any dental laboratory. Invest in this top-of-the-line machine to elevate the quality of your dental model trimming process.