1,Connect the handpiece cable and foot control cable to the interface of the control box. 2,After confirming that the voltage marked on the control box matches the voltage you are using, plug the power cord into the power outlet.
3. Adjust the speed control knob to the lowest speed "0".
4. Turn on the power of the control box.
5. Turn the speed control knob clockwise to increase the speed.
6. If you need to change the direction of rotation, please turn off the motor first. After confirming that the handpiece stops
rotating, turn the forward/reverse switch to change the direction of rotation.
7,When the foot control is needed to control, turn the hand control/foot control switch to the "poot" position.
English
